Prefabrication of columns and cages, made to your specifications, delivered ready to install. We can also deliver cut and bent bar such as Z Bar, Ligatures, Dowels, Corner Bars and more, all made to your required sizes.

Call Us

Square Mesh

This general-purpose mesh is commonly used for reinforcing in flat concrete such as foot paths, slabs, driveways, paving and walls.

Square mesh is manufactured from L grade ribbed wires (D500L) welded together to form squares across the mesh as 0.200 x 0.200m with the SL81 the only exception at 0.100 x 0.100m. Sheets weigh from 33 – 105 kg each.  Note that there is as variance in sheet sizes of 5.8m or 6.0m x 2.4m, dependent of the supplier used.

Compliant with AS/NZS 4671 and ACRS approved and is available in a variety of gauge diameters.  
Also available, as a limited supply, in 4.0 x 2.0m in the smaller gauge wire SL62 & SL72, this is not as readily available as the larger 5.8 / 6.0 x 2.4m sheets but a handy alternative. 

Mesh 200x200mm Square SL62 SQ 6mm 5.8/6.0m x 2.4m SL72 SQ 7mm 5.8/6.0m x 2.4m SL82 SQ 8mm 5.8/6.0m x 2.4m SL92 SQ 9mm 5.8/6.0m x 2.4m SL102 SQ 10mm 5.8/6.0m x 2.4m SL62 UTE Mesh SQ 6mm 4 x 2m SL72 UTE Mesh SQ 7mm 4 x 2m
Mesh 100x100mm Square SL81 SQ 8mm 5.8/6.0m x 2.4m

Rectangle Mesh

Rectangular reinforcing mesh is used for reinforcing thin concrete types such as floor slabs and walls which require a higher tensile stability to maximise strength and reduce cracking such as pavements, suspended floors, precast panels and flooring. As with the square mesh this mesh is manufactured from L grade ribbed wires (D500L) welded together with 0.100 x 0.200m spacing to form rectangular shapes. Sheets weigh between 68 – 157 kg each. 

Compliant with AS/NZS 4671 and ACRS approved this mesh is available in a variety of gauge diameters and sheet size of 5.8 / 6.0 x 2.4m only. As with the square mesh the sheets size vary depending on supplier used.

Mesh 100x200mm Rectangle RL718 RT 7mm 5.8/6.0m x 2.4m RL818 RT 8mm 5.8/6.0m x 2.4m RL918 RT 9mm 5.8/6.0m x 2.4m RL1018 RT 10mm 5.8/6.0m x 2.4m RL1118 RT 11mm 5.8/6.0m x 2.4m RL1218 RT 12mm 5.8/6.0m x 2.4m

Trench Mesh

Trench mesh is made specifically for use in residential strip footing trenches. Manufactured from L grade ribbed wires (D500L), using a variety of wires up to 16mm diameter.

Sheets are 6m in length, with widths ranging from 0.200m (3 bar) to 0.600m (5 bar). Sheets weighs between 7 – 41 kg.